Homemade Bird Feeder Pole

Cut some stiff wire to a length of 4 inches then bend into an S-shape using pliers. Fill feeders with seed lower the umbrella arms attach them to the S-shape hooks and raise arms to a horizontal position.

Advanced Pole System Wild Birds Unlimited Wild Birds Unlimited

Watch this video to find out how.

Homemade bird feeder pole. First the T-section was screwed onto the top of the long pole. By dusk it was almost half empty. Both 18 arms were then screwed into the sides of the T-section.

I snaked my conduit or feeder pole into the hole and added 2 screws at the bottom to secure it to the deck. They used a drill to cut holes in the end caps and then used the bolts nuts washers to secure the S-hooks to the ends of the caps. Maintenance products for bird feeders bird feeder poles cleaners hooks brackets hangers cables and more.

Starting from scratch by constructing bird feeder first and then electrifying it If you are not much into carpentry the first option may be the easier way. Easy peasyand less money than a regular bird feeder pole. You will need plastic dishes the support the PVC pipe from the top and bottom.

Pliers were used to tighten the S. The baffle stops the squirrels from climbing. The wood is used so you do not hit the pipe directly with the hammer which would bend the pipe.

The bottom one holds the birds feed. Kettle Moraine Squirrel Proof 4 Arm Bird Feeder Pole Set with Baffle Twister Ground Socket This one has 4 arms so if you have many different feeders for your different birds this one would work too. Lisa ZinkOutside the house.

This is well made and will last for years. Try using a hammer and block of wood to hammer the 2 foot 06 m section into the ground about 15 feet 05 m deep. Make use of your leftover orange lemon or grapefruit rind by turning it into a mini bird feeder.

Not a tit in sight. Insert the hooks into the holes at the end of each arm. I hung the hook in the hole I drilled at the end of the conduit and hung the filled bird feeder on that.

Electrifying existing bird feeder or bird feeder pole or 2. DIY Squirrel and Raccoon Bird Feeder Guard While feeding birds is a popular pastime feeding squirrels and raccoons is notTo keep the furry critters away from your bird feeder make a DIY guard from a piece of stovepipe. It wont last long but if you eat a lot of citrus fruit you can easily replace it.

Make s-shaped hooks. Homemade PVC Pipe Bird Feeder Now just find a tree branch to hang it on with some string and youre set to feed some birds.

How To Build A Copper Bird Feeder Pole 6 Steps With Pictures